KinCony CO16 16-Ch Analog & 4-Ch PT100 Smart Relay Controller
Frequently Bought Together
Features
- Industrial-Grade Mixed-Signal Architecture — Powered by the dual-core ESP32-S3 (N16R8), purpose-built to bridge massive analog data acquisition with robust relay control in a single DIN-rail device.
- Dual-Sensing Capability — Combines 16 independent 16-bit ADS1115 analog channels (jumper-selectable 0–10V / 4–20mA) with an independent 4-channel PT100 RTD circuit. Read industrial transmitters and high-precision temperature probes simultaneously without external signal conditioners.
- Integrated Control & Isolation — Features 16 mechanical relay outputs (up to AC 250V / 7A) and 16 opto-isolated dry contact inputs, ensuring safe, interference-free integration with external pumps, valves, and industrial contacts.
- On-Site Color Diagnostics — The first in its class to feature a ST7789 SPI color TFT LCD, providing clear, multi-line on-site readouts for IP addresses, network status, and Tuya connectivity, simplifying field commissioning.
- Versatile Connectivity & Heavy-Duty Expansion — Standard 100M Ethernet and isolated RS485. Ready for remote deployments with dedicated slots for SIM7600E 4G or LoRa (sharing one interface), plus a dedicated hardware variant for KNX building automation.
- Reliable Automation & Manual Override — Equipped with a DS3231 high-precision RTC for time-based scheduling and a microSD slot for local data logging. 16 physical toggle switches allow manual relay overrides even if the MCU is offline.
- Open-Source Ecosystem & Multi-Protocol Support — KCS v3 firmware natively supports MQTT, Modbus, BACnet, and Tuya. Enjoy zero-config Home Assistant auto-discovery, with full support for ESPHome, Tasmota, Arduino, and ESP-IDF.
Why Choose
CO-Series Positioning: The CO16 belongs to KinCony’s brand-new CO (Collection) Series — the ultimate high-density mixed-signal controller. While the B-Series and F-Series focus heavily on switching density, CO16 shifts the focus to massive analog data acquisition.
- Unmatched Analog Density — Unlike the B16 or F16, which offer only 4 analog inputs, CO16 provides 16 independent ADS1115 channels. It is the only choice in this tier for projects requiring direct, high-precision reading of 16 industrial sensors.
- Dedicated PT100 Temperature Acquisition — The B16 and F16 require external 1-Wire sensors or lack dedicated RTD support. CO16 integrates an independent 4-channel PT100 RTD circuit, allowing dual-sensing: 16 analog metrics + 4 high-precision temperature readings simultaneously.
- No Compromise Between Sensing and Switching — CO16 doesn't force you to buy an analog input module *and* a relay board. It packs 16 analog inputs + 4 PT100 + 16 relays + 16 isolated inputs into a single DIN-rail device, saving panel space and reducing wiring complexity.
- Right Choice vs B16 and F16 — Choose CO16 when analog input count and PT100 temperature sensing are the primary requirements, with relay control as a necessary complement. Choose B16 for a compact, budget-friendly 16-channel relay controller with basic sensing. Choose F16 when 16A high-current relays and field-replaceable OMRON modules are the absolute priority.
- No Compromise on Software Freedom — Like all KinCony controllers, CO16 is fully unlocked. Whether you use KCS v3, ESPHome, or custom ESP-IDF code, you retain 100% local control and zero vendor lock-in.
Technical Specifications
| Category | Specification |
|---|---|
| Core Processor | ESP32-S3-WROOM-1U (N16R8, dual‑core 32‑bit Xtensa LX7) |
| Analog Inputs |
16× ADS1115 16‑bit ADC ▪ Each channel: DC 0–10 V or 4–20 mA (set by jumper) ▪ Jumper UP: DC 0–10 V signal ▪ Jumper DOWN: DC 4–20 mA signal |
| Temperature Inputs |
4× PT100 RTD ▪ Read via MAX31865 ▪ Channel switching via NX3L4051 |
| Digital Outputs |
16× relays ▪ Contact: COM, NO (1 × SPST-NO / Form A per channel) ▪ Max load: AC 250 V / 7 A per channel |
| Digital Inputs |
16× dry contact, opto‑isolated ▪ Cable length: up to 500 m (dependent on installation) |
| Wireless Connectivity | ▪ Wi‑Fi 2.4 GHz (802.11 b/g/n) ▪ Bluetooth 5.0 (BLE) |
| Wired Connectivity | ▪ Ethernet: 100M RJ45 (IPv4/IPv6) ▪ RS485 ▪ USB‑C (flash firmware) |
| Expansion Slots | ▪ SIM7600E 4G module slot ▪ LoRa module (optional) |
| IoT Platform | Tuya‑compatible (via Wi‑Fi/Bluetooth) |
| Onboard Peripherals | ▪ RTC: DS3231 (battery socket on PCB) ▪ Display: ST7789 SPI color TFT LCD ▪ Storage: microSD card socket (SPI bus) ▪ Buttons: 3× (ESP32 Reset / ESP32 Download / Tuya Config) ▪ Toggle Switches: 16× (Manual relay ON/OFF control) |
| Power Supply | 12–24 VDC |
| Dimensions | 225 × 83 × 56 mm |
| Mounting | 35 mm DIN rail (EN 60715) |
Onboard Components
- 1. ESP32-S3 Chip
ESP32-S3-WROOM-1U (N16R8) with Xtensa 32-bit LX7 dual-core processor, 16MB Flash and 8MB PSRAM - 2. Tuya Chip
Tuya wireless communication module for cloud connectivity - 3. Relay
16× mechanical relays (HF46F-G series), SPST-NO / Form A, AC 250V / 7A per channel - 4. Tuya Antenna Connector
SMA female connector for Tuya wireless communication - 5. Digital Input Terminals
Screw terminals for 16× opto-isolated dry contact digital inputs - 6. RS485 Terminals
Screw terminals for RS485 communication (A / B) - 7. RF433MHz Receiver Slot
Socket for optional RF433MHz wireless receiver module - 8. LoRa Antenna Connector
SMA female connector for optional LoRa module communication - 9. PT100 Sensor Terminals
Screw terminals for 4× PT100 RTD temperature sensors - 10. DC Power Terminals
Screw terminals for DC 12–24V wide-voltage power input - 11. KNX Power Connector
Dedicated connector for KNX bus power (KNX version only) - 12. KNX Sync Button (Reserved)
Reserved function button for future KNX synchronization
- 13. SIM7600 4G Module Slot
Socket for optional SIM7600E 4G LTE module (Europe & Southeast Asia) - 14. KNX Module Slot
Socket for optional KNX communication module (KNX version only) - 15. Analog Input Terminals
Screw terminals for 16× analog inputs (A01–A16) - 16. Analog Input Jumpers
Jumper headers for each analog channel (0–10V / 4–20mA selection) - 17. Ethernet Port
100M RJ45 Ethernet port (IPv4/IPv6) - 18. USB-C Port
For firmware flashing only (cannot be used for power supply or data communication) - 19. ESP32 Download Button
Download button for ESP32 firmware flashing - 20. ESP32 Reset Button
Reset button for ESP32 module - 21. 4G Antenna Connector
SMA female connector for 4G cellular communication - 22. Relay Terminals
Screw terminals for 16× relay outputs (COM / NO per channel) - 23. ESP32 Antenna Connector
SMA female connector for Wi-Fi and Bluetooth wireless communication
- 24. ST7789 TFT LCD
SPI color TFT LCD for showing IP address and connection status - 25. SD Card Slot
microSD card socket (SPI bus) for storing images and files - 26. Toggle Switch
Manual relay ON/OFF backup control (16× toggle switches) - 27. Tuya Config Button
Config button for Tuya network pairing
- 28. Relay Status LED
Indicate the ON/OFF status of each relay channel - 29. Tuya Status LED
Indicates Tuya connection status - 30. Power Status LED
PWR indicator, shows power supply status
Onboard Isolation & Protection
Input Protect
Onboard input protection circuitry safeguards the analog input channels against overvoltage, overcurrent, and accidental miswiring, ensuring long-term reliability in industrial environments.
Thicken Track
Reinforced copper traces on high-current paths, ensuring stable power delivery and minimal voltage drop under heavy loads.
TVS Protection
Transient Voltage Suppressors absorb surge voltages and spikes on power and signal lines, safeguarding sensitive components from lightning, ESD, and inductive kickback.
Optocoupler Isolation
Optocouplers isolate external signals from the MCU, preventing ground loops, interference, and voltage spikes from affecting the control logic.
System Block Diagram
Outline Dimensions
Front View — Overall 225 × 83 mm / Aluminum cover 216 × 45 mm
Side View — Overall height 56 mm / Aluminum cover height 40 mm
Overall Length
225 mm
Overall Width
83 mm
Overall Height
56 mm
Aluminum Cover
216 × 45 × 40 mm
Mounting
35 mm DIN
Supports Arduino, Micropython, ESP-IDF development
Arduino IDE
Arduino IDE is an open-source electronic prototyping platform. It is convenient, flexible, and easy to start. With a simple learning curve, you can rapidly develop your projects.
MicroPython
MicroPython is a full implementation of Python 3 that runs directly on embedded hardware. It enables agile IoT development like Raspberry Pi Pico.
ESP-IDF
ESP-IDF is Espressif's official development framework. It provides low-level hardware access, maximum performance, and professional control for production-grade firmware.
For full firmware packages, demo codes and programming tutorials, please switch to the "Software Solution" tab above.
Packing List
Version
+ 4G
+ LoRa
Version
+ 4G
+ LoRa
Note: For versions equipped with KNX, 4G, or LoRa modules, these modules are factory pre-installed inside the controller. Consequently, all six versions are visually identical from the outside. To verify the correct module, please remove the aluminum top cover.
Batch Customization Service
Support software and hardware customization including interface logo label case etc.
Label Customization
Logo, sticker, nameplate
Hardware Customization
PCB, interface, casing
Software Customization
Firmware, function, UI
Contact Customer Service
Send your customization requirements
One-to-One Technical Service
Professional evaluation and solution
Sign Contract & Start Project
Custom development and sample making
Sample Approval & Mass Production
Batch delivery after sample passes
CO16 vs B16 vs F16
Shared Features: ESP32-S3-WROOM-1U (N16R8) · DC 12–24V · 100M Ethernet + Wi-Fi + Bluetooth · DS3231 RTC · SSD1306 I2C display · microSD (SPI bus) · RS485 · USB-C · DIN-rail mounting · 16× opto-isolated dry contact inputs · KCS v3 firmware · ESPHome / Home Assistant / Tuya support.
Key Differences
| Item |
CO16(16CH Analog Input) |
B16(16CH Relay) |
F16(16CH Removable Relay) |
|---|---|---|---|
| Output Type | 16× mechanical relay, SPST-NO / Form A (COM / NO only, no NC) | 16× mechanical relay, SPST-NO / Form A (COM / NO only, no NC) | 16× removable OMRON relay, SPDT / Form C, wired as COM / NO only (NC not exposed) |
| Relay Quality | Standard relay, AC 250V / 7A per channel | Standard relay, AC 250V / 7A per channel | High-grade OMRON relay, AC 250V / 16A · DC 30V / 16A per channel |
| Analog Inputs | 16× ADS1115 16-bit ADC ▪ 0–10V or 4–20mA (jumper-selectable per channel) |
4× ADS1115 16-bit ADC ▪ 2× 0–5V (A1, A2) + 2× 4–20mA (A3, A4) |
4× ADS1115 16-bit ADC ▪ 2× 0–5V (A1, A2) + 2× 4–20mA (A3, A4) |
| PT100 Temperature | 4× PT100 RTD ▪ MAX31865 + NX3L4051 |
Not supported | Not supported |
| Display | ST7789 SPI Color TFT LCD | SSD1306 I2C OLED | SSD1306 I2C OLED |
| Digital Inputs | 16× opto-isolated (up to 500m) | 16× opto-isolated (up to 500m) | 16× opto-isolated (up to 500m) |
| GPIO | Not supported | 7× 1-Wire | 4× 1-Wire + 2× free GPIO |
| Manual Override | 16× toggle switches (manual relay ON/OFF) | 16× toggle switches (manual relay ON/OFF) | 16× toggle switches (manual relay ON/OFF) |
| Optional Modules | KNX · 4G (SIM7600E) · LoRa (4G and LoRa share one interface) |
Not supported | RF433MHz receiver socket |
| Dimensions | 225 × 83 × 56 mm | 160 × 83 × 59 mm | 262 × 127 × 62 mm |
Which One Should You Choose?
Choose CO16 if you need:
- 16 channels of high-precision analog input (0–10V / 4–20mA)
- 4× PT100 RTD temperature sensing for industrial monitoring
- KNX / 4G / LoRa expansion for building automation or remote sites
- Color TFT display for IP address and connection status
- 16× relay outputs for AC 250V / 7A or DC 30V loads
- 16 manual toggle switches for relay override
Choose B16 if you need:
- 16× relay outputs for AC 250V / 7A or DC 30V loads
- 4× analog inputs (2× 0–5V + 2× 4–20mA) for basic sensing
- 7× 1-Wire GPIO for DS18B20 temperature sensors
- Compact size (160mm) for space-constrained cabinets
- Standard relay control without analog-intensive requirements
Choose F16 if you need:
- 16× high-current relay outputs (AC 250V / 16A or DC 30V) for heavy loads
- Removable OMRON relays for easy field replacement
- 16× manual toggle switches for relay override even if MCU is offline
- RF433MHz receiver for wireless remote control
- 4× analog inputs + 4× 1-Wire + 2× free GPIO
I. Firmware Options & Features
| Solution | Ideal For | Key Advantages |
|---|---|---|
| 1. KCS Firmware (Recommended) | Beginners / Zero-Code Users |
✔ Auto-detects Home Assistant via MQTT (zero config) ✔ Works with Tuya App + Alexa/Google Voice Control ✔ Local IFTTT automation (no internet needed) ✔ 2-year free KinCony Cloud (official store only) ✔ Apple HomeKit support for Siri ✔ Supports Loxone Miniserver integration ✔ Multi-protocol: HTTP, MQTT, Modbus (RS485/TCP), BACnet, DMX512, Tuya |
| 2. ESPHome Firmware | Home Assistant Enthusiasts |
✔ Full open-source customization ✔ Official ESPHome device support for CO16 ✔ Web UI + deep HA integration ✔ Full YAML examples available |
| 3. Tasmota Firmware | Open-Source Community |
✔ Massive plugin ecosystem ✔ MQTT / Web control + rule engine |
| 4. Arduino / ESP-IDF Custom Code | Developers |
✔ Full Arduino demos provided ✔ Supports MicroPython / ESP-IDF |
| 5. Hybrid Setup (Best Practice) | Advanced Users | Tuya App (remote via internet) + Home Assistant (local via LAN) — Security + convenience |
II. Technical Resources
Direct links to pin definitions, ESPHome configurations, Arduino demo source codes, and KCS firmware. All open-source and maintained on GitHub.
| Resource | Link |
|---|---|
| KCS Firmware | kcs_firmware/CO16/kcs_v3.27.2.bin |
| Pin Definitions | CO16_pin_definition.md |
| Arduino Demos | CO16/ (10 examples) |
| ESPHome Configuration | Official ESPHome CO16 device page |
III. Getting Started Guide
Step 1: Flash Firmware
We recommend using the Online Flasher — no driver installation required, works entirely in your browser. Alternatively, follow the Quick Start Guide for manual flashing with the ESP32 desktop tool.
Step 2: Connect & Configure
Power on the board, connect via Ethernet or Wi-Fi, and access the web configuration interface. For detailed configuration, see the KCS Firmware User Guide.
Step 3: Integrate
Enable MQTT auto-discovery in Home Assistant, or pair with Tuya App for voice control.
IV. Video Tutorial: How to Flash KCS Online
No Drivers Needed, No Complex Setup—Flash Directly within Your Browser in 1 Minute!
Looking for software solutions for other products?
View All Product Software Solutions →







