KinCony AIO Hybrid 5‑Channel Relay Controller & 4‑Channel Dimmer
Frequently Bought Together
Features
- The Ultimate All-in-One Automation Hub — Forget wiring together multiple separate modules. The AIO Hybrid packs relay switching, 0-10V analog dimming, IR/RF control, Zigbee coordination, and multi-network connectivity into a single, compact DIN-rail enclosure. It is the perfect brain for smart homes, light commercial automation, or complex custom projects.
- Heavy-Duty Switching & Precise Analog Control — Equipped with 5× pluggable OMRON® relays rated at 16A per channel for high-power loads, alongside 4× 0–10V DAC outputs for seamless LED dimming or motor speed regulation, and 4× 16-bit ADC inputs for high-precision sensor reading.
- Built-in Multi-Protocol Wireless — Acts as a native Zigbee 3.0 hub to pair sensors and switches directly. It also features built-in 433MHz RF and IR receivers/transmitters, allowing you to replace physical remotes and integrate legacy wireless devices without any add-on modules.
- Massive I/O & Redundant Connectivity — Features 12× opto-isolated dry contact inputs for long cable runs and 2× Free GPIOs (perfect for WS2812B LED strips). Connects via Wi-Fi, Bluetooth 5.0, 100M Ethernet, and RS485, ensuring it fits into virtually any network environment.
- Precise Timekeeping & Local Storage — The onboard DS3231 RTC (with battery backup) keeps accurate time through power interruptions, making scheduled automations reliable. An onboard microSD card slot allows you to log sensor data, store configurations, or cache firmware updates locally.
- Fail-Safe Hardware Redundancy — Includes 5 manual override toggle switches that allow you to force relay states directly, guaranteeing continuous operation even if the software or network goes down.
- Seamless Ecosystem & Software Freedom — Supports Home Assistant auto-discovery, Tuya, and KCS firmware (with local IFTTT logic). Whether you prefer Arduino IDE, MicroPython, or ESP-IDF, the AIO Hybrid is fully unlocked with zero vendor lock-in.
Technical Specifications:
| Category | Specification |
|---|---|
| Core Processor | ESP32-S3-WROOM-1U (N16R8, dual‑core 32‑bit Xtensa LX7) |
| Digital Outputs |
5× OMRON® pluggable relays ▪ Contact: COM, NO (1 × SPDT / Form C per channel) ▪ Max load: 250 VAC / 30 VDC, 16 A per channel |
| Analog Outputs | 4× DAC 0–10 V (for dimming or motor speed control) |
| Analog Inputs |
4× ADS1115 16‑bit ADC ▪ 2× 0–5 VDC (A1, A2) ▪ 2× 4–20 mA (A3, A4) |
| Digital Inputs |
12× dry contact, opto‑isolated ▪ Cable length: up to 500 m (dependent on installation) |
| Digital I/O (GPIO) | ▪ 2× free GPIO (direct to ESP32) |
| Wireless & IR |
▪ Wi‑Fi 2.4 GHz (802.11 b/g/n) ▪ Bluetooth 5.0 (BLE) ▪ 433 MHz RF receiver & sender ▪ IR receiver & sender ▪ Zigbee 3.0 |
| IoT Platform | Tuya‑compatible (via Wi‑Fi/Bluetooth) |
| Wired Connectivity | ▪ Ethernet: 100M RJ45 (IPv4/IPv6) ▪ RS485 ▪ USB‑C (programming) |
| Onboard Peripherals |
▪ RTC: DS3231 (battery socket) ▪ Display: SSD1306 I²C OLED ▪ Storage: microSD card socket (SPI bus) ▪ Buttons: 4× (ESP32 Reset / ESP32 Download / Tuya Config / IR & RF Config) ▪ Toggle Switches: 5× (Manual relay ON/OFF control) |
| Power Supply | 12 or 24 VDC |
| Dimensions | 218 × 127 × 64 mm |
| Mounting | 35 mm DIN rail |
Onboard Components
System Block Diagram
AIO Hybrid Enclosure Design

Top View — Hybrid Enclosure Top Cover

Cover Detail

Back View — Plastic Base with 35 mm DIN Rail Mount

DIN Rail Base Detail — 35 mm Standard DIN Rail
Hybrid Enclosure Advantages
1. Premium Feel & Durability: Compared with ordinary ABS plastic cases, the metal top cover offers a more solid, high-end texture, better heat dissipation, and enhanced structural protection.
2. EMI Shielding: As a non-magnetic conductor, the metal top cover acts as a Faraday cage, protecting internal circuits from external electromagnetic radiation and preventing internal emissions.
Outline Dimensions
Front View — Overall 218 × 127 mm
Side View — Overall height 64 mm
Overall Length
218 mm
Overall Width
127 mm
Overall Height
64 mm
Mounting
35 mm DIN
AC & DC Connection Diagram
Onboard high-quality 5-channel OMRON® relays supporting up to 250VAC / 30VDC @ 16A, alongside dedicated 0-10V analog output terminals for precision dimming and speed control.
Supports Arduino, Micropython, ESP-IDF development
Arduino IDE
Arduino IDE is an open-source electronic prototyping platform. It is convenient, flexible, and easy to start. With a simple learning curve, you can rapidly develop your projects.
MicroPython
MicroPython is a full implementation of Python 3 that runs directly on embedded hardware. It enables agile IoT development like Raspberry Pi Pico.
ESP-IDF
ESP-IDF is Espressif's official development framework. It provides low-level hardware access, maximum performance, and professional control for production-grade firmware.
For full firmware packages, demo codes and programming tutorials, please switch to the "Software Solution" tab above.
Packing List
Please Note: The RTC coin cell battery is not included in the standard package due to shipping regulations.
Batch Customization Service
Support software and hardware customization including interface logo label case etc.
Label Customization
Logo, sticker, nameplate
Hardware Customization
PCB, interface, casing
Software Customization
Firmware, function, UI
Contact Customer Service
Send your customization requirements
One-to-One Technical Service
Professional evaluation and solution
Sign Contract & Start Project
Custom development and sample making
Sample Approval & Mass Production
Batch delivery after sample passes
I. Firmware Options & Features
| Solution | Ideal For | Key Advantages |
|---|---|---|
| 1. KCS Firmware (Recommended) | Beginners / Zero-Code Users |
✔ Auto-detects Home Assistant via MQTT (zero config) ✔ Works with Tuya App + Alexa/Google Voice Control ✔ Local IFTTT automation (no internet needed) ✔ 2-year free KinCony Cloud (official store only) ✔ Apple HomeKit support for Siri ✔ Supports Loxone Miniserver integration ✔ Multi-protocol: HTTP, MQTT, TCP, RS485 Modbus |
| 2. ESPHome Firmware | Home Assistant Enthusiasts |
✔ Full open-source customization ✔ Official ESPHome device support for AIO Hybrid ✔ Web UI + deep HA integration ✔ Full YAML examples available |
| 3. Tasmota Firmware | Open-Source Community |
✔ Massive plugin ecosystem ✔ MQTT / Web control + rule engine |
| 4. Arduino / ESP-IDF Custom Code | Developers |
✔ Full Arduino demos provided ✔ Supports MicroPython / ESP-IDF |
| 5. Hybrid Setup (Best Practice) | Advanced Users | Tuya App (remote via internet) + Home Assistant (local via LAN) — Security + convenience |
II. Technical Resources
Direct links to pin definitions, ESPHome configurations, Arduino demo source codes, and KCS firmware. All open-source and maintained on GitHub.
| Resource | Link |
|---|---|
| KCS Firmware | kcs_firmware/AIO_Hybrid/ |
| Pin Definitions | AIO_Hybrid_pin_definition.md |
| Arduino Demos | AIO_Hybrid/ (13 examples) |
| ESPHome Configuration | Official ESPHome AIO Hybrid device page |
III. Getting Started Guide
Step 1: Flash Firmware
We recommend using the Online Flasher — no driver installation required, works entirely in your browser. Alternatively, follow the Quick Start Guide for manual flashing with the ESP32 desktop tool.
Step 2: Connect & Configure
Power on the board, connect via Ethernet or Wi-Fi, and access the web configuration interface. For detailed configuration, see the KCS Firmware User Guide.
Step 3: Integrate
Enable MQTT auto-discovery in Home Assistant, or pair with Tuya App for voice control.
IV. Video Tutorial: How to Flash KCS Online
No Drivers Needed, No Complex Setup—Flash Directly within Your Browser in 1 Minute!
Looking for software solutions for other products?
View All Product Software Solutions →








