KinCony B16M 16-Channel Smart MOSFET Controller
Frequently Bought Together
Features
- 16 High-Current MOSFET Channels — Equipped with 16× MOSFET outputs rated at 10A per channel, providing silent, high-speed, and wear-free switching for demanding DC loads like high-power LED strips, DC motors, and solenoid valves across large-scale projects.
- 16-Channel Opto-Isolated Digital Inputs — Includes 16× dry contact inputs with optocoupler isolation, supporting cable runs up to 500 meters for reliable status feedback from push buttons, limit switches, and industrial sensors.
- Precision Sensing Suite — Features 4× 16-bit ADC channels for high-accuracy analog monitoring: 2× 0–5 VDC and 2× 4–20 mA loop-powered inputs, ideal for pressure, level, and temperature transmitters.
- Redundant Network & Industrial Bus — Dual connectivity with Wi-Fi and 100Mbps Ethernet ensures reliable local/remote access. Includes an isolated RS485 port for long-distance Modbus communication and integration with legacy equipment.
- Standalone Time Intelligence & Diagnostics — Onboard DS3231 RTC (with battery backup) keeps perfect time even without internet, while the OLED display provides at-a-glance IP address and status, and the microSD slot enables local data logging.
- Fail-Safe Manual Override — Physical toggle switches for each MOSFET channel allow you to force loads ON or OFF directly, guaranteeing continuous operation and simplifying troubleshooting during network drops.
- Seamless Ecosystem Integration — Supports Home Assistant auto-discovery (zero-config), KinCony Cloud, Loxone, Apple HomeKit, and Tuya for unified local and cloud automation.
- Flexible Firmware & Development — Full support for KCS firmware (HTTP, MQTT, TCP, RS485 Modbus, Tuya), ESPHome, Tasmota, Arduino IDE, MicroPython, and ESP-IDF.
Why Choose
B-Series Positioning: The B16M belongs to KinCony's B-Series economy line. While it shares the 16-channel layout of the B16, the B16M replaces mechanical relays with 10A MOSFET solid-state switches, making it purpose-built for advanced DC automation, silent operation, and high-frequency switching.
- Built for High-Frequency DC Switching — If your project requires frequent toggling—dynamic LED lighting, automated valves, or motorized mechanisms—the B16M's solid-state architecture means you can switch as often as your application demands, without counting relay cycles or worrying about contact degradation. This is the advantage that mechanical relays fundamentally cannot match.
- Standard Form Factor vs. T16 — While the T16 offers the same 16CH/10A MOSFET specs in an ultra-compact "Tiny" footprint, the B16M provides the standard 160mm DIN-rail form factor. This offers more physical room for wiring organization, better heat dissipation spacing, and compatibility with standard electrical enclosure layouts.
- Right Choice vs B16, F16, and T16 — Choose B16M for standard-sized, high-power, high-frequency DC switching. Choose B16 for affordable AC mains control with NC contacts. Choose F16 for industrial-grade 16A pluggable OMRON® relays and 433MHz RF. Choose T16 only if your cabinet is extremely space-constrained.
- Own Your Automation Stack — The B16M runs your logic locally. With native Home Assistant integration and an open development environment, your automations don't depend on a third-party cloud. You retain 100% ownership of your data, your rules, and your device lifecycle—no subscriptions, no vendor lock-in.
Technical Specifications:
| Category | Specification |
|---|---|
| Core Processor | ESP32-S3-WROOM-1U (N16R8, dual‑core 32‑bit Xtensa LX7) |
| Digital Outputs |
16× MOSFET ▪ Max load: 10 A per channel ▪ Silent, high-speed switching |
| Analog Inputs |
4× 16‑bit ADC ▪ 2× 0–5 VDC ▪ 2× 4–20 mA (loop‑powered) |
| Digital Inputs |
16× dry contact, opto‑isolated ▪ Cable length: up to 500 m (dependent on installation) |
| Free GPIOs |
▪ 3× without PCB pull-up resistors (GPIO13, GPIO14, GPIO21) ▪ 4× with PCB pull-up resistors (GPIO15, GPIO40, GPIO47, GPIO48) |
| Wireless Connectivity | ▪ Wi‑Fi 2.4 GHz (802.11 b/g/n) ▪ Bluetooth 5.0 (BLE) |
| IoT Platform | Tuya‑compatible (via Wi‑Fi/Bluetooth) |
| Wired Connectivity | ▪ Ethernet: 100M RJ45 (IPv4/IPv6) ▪ RS485 ▪ USB‑C (programming) ▪ I²C (expansion) |
| Onboard Peripherals | ▪ RTC: DS3231 (battery socket) ▪ Display: SSD1306 128×64 OLED (I²C) ▪ Storage: microSD card socket ▪ Buttons: 3× (ESP32 Reset / ESP32 Download / Tuya Config)) |
| Power Supply | 12-24 VDC |
| Dimensions | 160 × 83 × 56 mm |
| Mounting | 35 mm DIN rail |
Onboard Components


-
1.
ESP32-S3-WROOM-1U N16R8 Chip
Adopts ESP32-S3 series chip with Xtensa 32-bit LX7 dual-core processor, built in 16MB Flash and 8MB PSRAM -
2.
Tuya Chip
Tuya wireless communication module for cloud connectivity and smart control -
3.
MOSFETs
High-current solid-state switches for driving DC loads silently and without mechanical wear -
4.
RTC Battery Holder
Battery holder, maintains RTC timekeeping when main power is off -
5.
MOSFET LED Indicator Ribbon Cable
Ribbon cable connecting the MOSFET status LEDs to the main board -
6.
OLED Display I²C Ribbon Cable
Ribbon cable connecting the OLED display to the main board via I²C -
7.
TVS Protection
Transient Voltage Suppressor, suppresses surge voltages and transient spikes -
8.
Digital Input Terminals
Screw terminals for dry contact digital input, opto-isolated -
9.
RS485 Terminals
Screw terminals for RS485 communication (A / B) -
10.
Analog Input Terminals
Screw terminals for analog input (0–5 V / 4–20 mA) -
11.
Free GPIO Terminals
Screw terminals for free GPIO access for custom IO projects -
12.
Power Supply Screw Terminal
Supports DC 12-24V wide voltage power input -
13.
MOSFET Output Terminals
Screw terminals for MOSFET output connection (DC loads only) -
14.
I²C Terminals
Screw terminals for I²C bus expansion -
15.
1-Wire GPIO Terminals
Screw terminals for 1-Wire devices such as temperature sensors
-
16.
Tuya Antenna Connector
SMA female connector, for Tuya wireless communication -
17.
ESP32 Antenna Connector
SMA female connector, for Wi-Fi and Bluetooth wireless communication -
18.
USB-C Port
For firmware flashing only (cannot be used for power supply or data communication) -
19.
Ethernet Port
100M RJ45 Ethernet port for stable wired network connection -
20.
PCF8575 I²C 16-bit GPIO Expander
I²C bus GPIO expander chip, expands available digital input/output channels -
21.
Back-EMF Suppression
Flyback diodes that protect the MOSFETs from voltage spikes generated by inductive DC loads when switched off -
22.
SSD1306 OLED Display
I²C OLED display for showing IP address and device connection status -
23.
microSD Card Slot
Supports external TF card for local data logging and file storage -
24.
ESP32 Reset Button
Reset button for ESP32 module -
25.
ESP32 Download Button
Download button for ESP32 firmware flashing -
26.
Tuya Config Button
Config button for Tuya network pairing -
27.
MOSFET Status LEDs
Indicates MOSFET output ON/OFF working status -
28.
Power Status LED
PWR indicator, shows power supply status -
29.
Tuya Status LED
Indicates Tuya cloud connection status


-
30.
Optocoupler Isolation
Prevents interference from external signals -
31.
Reverse Polarity Protection
Protects the circuit from reverse power connection
-
32.
W5500 Chip
Ethernet controller, extends 10/100 Mbps Ethernet via SPI interface -
33.
ADS1115 Chip
16-bit ADC for high-precision analog input
Onboard Isolation & Protection
Voltage Regulator
Provides a stable 3.3V output, protecting the core chip from voltage fluctuations.
Reverse Polarity Protection
Prevents circuit damage caused by accidental reverse power connection.
TVS Protection
Transient Voltage Suppressors absorb surge voltages and spikes, safeguarding sensitive components.
Optocoupler Isolation
Isolates external signals from the MCU, preventing interference and voltage spikes.
Back-EMF Suppression
Flyback diodes absorb high-voltage spikes generated by inductive DC loads (like motors or valves) when switched off, protecting the MOSFETs.
System Block Diagram
Enclosure Design

Top View — Aluminum Top Cover

Aluminum Cover Detail

Back View — Plastic Base with 35 mm DIN Rail Mount

DIN Rail Base Detail — 35 mm Standard DIN Rail
Aluminum Top Cover Advantages
1. Premium Feel: Compared with ordinary ABS plastic cases, the aluminum top cover offers a more solid, high-end texture and better heat dissipation.
2. EMI Shielding: As a non-magnetic conductor, the aluminum top cover acts as a Faraday cage, protecting internal circuits from external electromagnetic radiation and preventing internal emissions.
Outline Dimensions

Front View — Overall 160 × 83 mm / Aluminum cover 147 × 50 mm

Side View — Overall height 56 mm / Aluminum cover height 40 mm
Overall Length
160 mm
Overall Width
83 mm
Overall Height
56 mm
Mounting
35 mm DIN
Supports Arduino, Micropython, ESP-IDF development
Arduino IDE
Arduino IDE is an open-source electronic prototyping platform. It is convenient, flexible, and easy to start. With a simple learning curve, you can rapidly develop your projects.
MicroPython
MicroPython is a full implementation of Python 3 that runs directly on embedded hardware. It enables agile IoT development like Raspberry Pi Pico.
ESP-IDF
ESP-IDF is Espressif's official development framework. It provides low-level hardware access, maximum performance, and professional control for production-grade firmware.
For full firmware packages, demo codes and programming tutorials, please switch to the "Software Solution" tab above.
Packing List
Please Note: The RTC coin cell battery is not included in the standard package due to shipping regulations.
Batch Customization Service
Support software and hardware customization including interface logo label case etc.
Label Customization
Logo, sticker, nameplate
Hardware Customization
PCB, interface, casing
Software Customization
Firmware, function, UI
Contact Customer Service
Send your customization requirements
One-to-One Technical Service
Professional evaluation and solution
Sign Contract & Start Project
Custom development and sample making
Sample Approval & Mass Production
Batch delivery after sample passes
B16M vs B16 vs F16 vs T16
Shared Features: ESP32-S3 N16R8 · 100M Ethernet + Wi-Fi + Bluetooth · DS3231 RTC · OLED display · microSD · RS485 · 16× opto-isolated DI (500m) · DIN-rail mounting · ESPHome / Home Assistant / Tuya support.
Key Differences
| Item |
B16M(16CH MOSFET) |
B16(16CH Relay NC) |
F16(16CH Removable Relay) |
T16(16CH Tiny MOSFET) |
|---|---|---|---|---|
| Output Type | MOSFET DC switch (DC loads only) | Mechanical relay, COM / NC | Pluggable OMRON® SPDT relay, COM / NO | MOSFET DC switch (DC loads only) |
| Output Load | 10A per channel (DC only) | Max 250VAC / 30VDC, 7A per channel | Max 250VAC / 30VDC, 16A per channel | 10A per channel (DC only) |
| Switching | No contact, silent, high-speed; PWM via Free GPIO | Mechanical contact; audible click | Mechanical contact; pluggable for tool-free replacement | No contact, silent, high-speed; PWM via Free GPIO |
| Form Factor | Standard width (160mm) | Standard width (160mm) | Wide footprint (195mm) | Tiny form factor (115mm) |
| Analog Inputs | 4× 16-bit ADC (0–5V, 4–20mA) | 4× 16-bit ADC (0–5V, 4–20mA) | 4× 16-bit ADC (0–5V, 4–20mA) | 4× 16-bit ADC (0–5V, 4–20mA) |
| GPIO | 3× 1-Wire + 4× free GPIO | 3× 1-Wire + 4× free GPIO | 4× 1-Wire + 1× free GPIO | 3× 1-Wire + 4× free GPIO |
| Power Supply | 12–24 VDC wide voltage | 12 VDC (fixed) | 12/24 VDC | 12–24 VDC wide voltage |
* Note: "Max 250VAC" is the maximum rating. Relay contacts are fully compatible with global mains systems, including 110V/120V (North America) and 220V/240V (Europe/Asia).
Which One Should You Choose?
Choose B16M if you need:
- All loads are DC 12V / 24V (LED strips, DC motors)
- Silent, high-speed switching with no mechanical wear
- External PWM dimming or speed control via free GPIO
- Wide 12–24V DC input voltage flexibility
Choose B16 if you need:
- 16 channels of AC mains relay control
- Special COM / NC (normally closed) wiring logic
- Standard 7A capacity for typical AC loads
- A fixed 12V DC power system
Choose F16 if you need:
- Pluggable OMRON® relays for tool-free replacement
- Higher relay rating (16A per channel)
- Industrial-grade reliability with a larger installation footprint
- Built-in 433MHz RF receiver for wireless sensors
Choose T16 if you need:
- All DC loads but need a Tiny, space-saving footprint
- High-density installation in compact electrical cabinets
- Silent, high-speed switching (PWM via Free GPIO)
- Wide 12–24V DC power input
I. Firmware Options & Features
| Solution | Ideal For | Key Advantages |
|---|---|---|
| 1. KCS Firmware (Recommended) | Beginners / Zero-Code Users |
✔ Auto-detects Home Assistant via MQTT (zero config) ✔ Works with Tuya App + Alexa/Google Voice Control ✔ Local IFTTT automation (no internet needed) ✔ 2-year free KinCony Cloud (official store only) ✔ Apple HomeKit support for Siri ✔ Supports Loxone Miniserver integration ✔ Multi-protocol: HTTP, MQTT, TCP, RS485 Modbus, Tuya |
| 2. ESPHome Firmware | Home Assistant Enthusiasts |
✔ Full open-source customization ✔ Official ESPHome device support for B16M ✔ Web UI + deep HA integration ✔ Full YAML examples available |
| 3. Tasmota Firmware | Open-Source Community |
✔ Massive plugin ecosystem ✔ MQTT / Web control + rule engine |
| 4. Arduino / ESP-IDF Custom Code | Developers |
✔ Full Arduino demos provided ✔ Supports MicroPython / ESP-IDF |
| 5. Hybrid Setup (Best Practice) | Advanced Users | Tuya App (remote via internet) + Home Assistant (local via LAN) — Security + convenience |
II. Technical Resources
Direct links to pin definitions, ESPHome configurations, Arduino demo source codes, and KCS firmware. All open-source and maintained on GitHub.
| Resource | Link |
|---|---|
| KCS Firmware | kcs_firmware/B16M/ |
| Pin Definitions | B16M_pin_definition.md |
| Arduino Demos | B16M/ (11 examples) |
| ESPHome Configuration | Official ESPHome B16M device page |
III. Getting Started Guide
Step 1: Flash Firmware
We recommend using the Online Flasher — no driver installation required, works entirely in your browser. Alternatively, follow the Quick Start Guide for manual flashing with the ESP32 desktop tool.
Step 2: Connect & Configure
Power on the board, connect via Ethernet or Wi-Fi, and access the web configuration interface. For detailed configuration, see the KCS Firmware User Guide.
Step 3: Integrate
Enable MQTT auto-discovery in Home Assistant, or pair with Tuya App for voice control.
IV. Video Tutorial: How to Flash KCS Online
No Drivers Needed, No Complex Setup—Flash Directly within Your Browser in 1 Minute!
Looking for software solutions for other products?
View All Product Software Solutions →








